Mdac and Jet Runtime Modules Requires Reboot

[Jason Pate]

Is there a way to suppress the Reboot on these runtime Modules?

[Darryl]

In that case, what you would need to do is modify the runtime module project files. You can find each runtime module project file in a separate folder located at "C:\Program Files\Setup Factory 6.0\Runtimes", or whereever you installed the software. They are just regular project files so you can open them up and see what they do. Or you could even import the project files into your working project by going to File->Import->Setup Factory 6.0 Project.

All that being said, we don't recommend modifying the modules, however if you need to, they are there.

[Darryl]

However you may be referring to the reboot that is internal to MDAC itself, in which case, I'm not aware of any method that can be used to suppress it since if it wants to reboot, it means the some files couldn't be updated at that point However they may have a command line option for it. That may be somewhere to start looking if that is the case.

[Jason Pate]

Thanks I am going to give it a try, I know a reboot is needed, its just timing it so as smooth as possable over the whole install.